Set-up WiFi | August 2024 Units and Newer

1. On the mobile app, go to Main Screen > and tap ADD ROBOT
   
   
2. Tap SCAN QR CODE or ENTER ID MANUALLY (only do this if the camera can't scan the QR code on the Annaboto)
   
   
   
   
3. You will get a notification to join the "annaboto" WiFi network, please press Join.
   
   
4. On the following screen, please enter the WiFi name and password carefully. These need to match exactly.
   
   
5. Once the information is input, press ADD
   
   
6. The app will send the WiFi information to the Annaboto. It will take about 30 seconds for the Annaboto to add itself to the network. You will know it succeeded because the LED on the front will turn from BLINKING MAGENTA to SOLID WHITE.
   
   
   1. If, however, it goes back to Blinking Magenta, there might be a problem with the infomration that was sent. Please try to follow the steps again, starting with step 1.
      
      
7. Once the light is White, wait 10 seconds and turn OFF the Annaboto, then turn back ON. The machine will boot and the button in the front should be White. This means that the connection was successful and the machine is communicating with the cloud. Technology!

You are all set!

Note: Your phone must be connected to the same wifi that you are using for your Annaboto 

If you ever need to reconfigure the WiFi, press the front button for ~5 seconds until the light blinks magenta and repeat the steps above