In order to update your Annaboto, you have to be on the same network.
- On the main page, select the robot you want to update.
- Once you're in the robot page, tap on the Annaboto.
- Tap on the Advanced.
- Scroll to Manual Mode and tap the button. Then confirm.
- Tap YES.
-
Turn the toggle button to ON (orange is filled. Then press SAVE.
NOTE: in Manual Mode, you will be responsible for making sure that the machine doesn't overfill or run out of water while filling.
Here are the instructions:- Make sure Waste Tank is Empty and Fresh Tank is Full.
- Press the Front Button Once to START draining.
- Press the Front Button a 2nd time to STOP draining and START filling. Please pay attention and make sure the water in the grow tank stays below 1 inch from the top. You can open the Waste Lid to see how far along the water is.
- Press the Front Button a 3rd time to STOP filling.
- That's it!
TO GET OUT OF MANUAL MODE
Please follow these same steps until step 6, in which you will press the button to NO. This will undo manual mode.
Comments
0 comments
Please sign in to leave a comment.